eLifeMagz.Com » Build A Budget Personal Computer For Less Than $500

Home > Business > Build A Budget Personal Computer For Less Than $500

Build A Budget Personal Computer For Less Than $500

November 20th, 2010 elifemagz Leave a comment Go to comments

IDG News Service – Building your own desktop Personal Computer is a fun and easy plan that will enable you to customize a network to fit your needs. Earlier this year you showed you how to erect a high-powered video modifying machine, but this time you worked to keep the cost label beneath US$500.

Watch a video of this bill erect on YouTube.

First, let’s examine our components.

- AMD Athlon II Dual Core 2.9GHz processor, $60

- 4 GB Kingston DDR3 SDRAM, $66

- Sapphire Radeon HD 4650 512MB graphics card, $34

- ASRock AM3 AMD 770 ATX motherboard, $60

- Antec 380-watt power supply, $45

- Lite-On DVD-CD burner, $17

- Samsung 7200 RPM 500GB SATA hard drive, $55

- Gigabyte ATX Mid Tower case, $17

- Microsoft Windows 7 Home Premium 64-bit, $100

- Total inclusive shipping, about $480

Without receiving precautions, it’s probable to damage ethereal Personal Computer components with immobile electricity. To prevent this, belligerent yourself by wearing an antistatic wrist strap trustworthy to a square of steel on your case.

To start the build, open the box and get up the motherboard. Do this by screwing the pewter spacing screws in to the analogous holes. Place the motherboard on tip and secure it using the enclosed screws. They should be tight, but not so parsimonious that you fissure the board.

Memory will be the initial part to setup on the motherboard. Depending on the number of mental recall sticks and slots, the setup might vary, so deliberate your manual. Open the latches on the mental recall slots and insert the sticks in the scold orientation. The latches will shut automatically.

Next we’ll increase the CPU to the motherboard. Lift up the bolt on the hollow and then line up the CPU in the scold position. The CPU will usually setup one way and will be shop-worn if extrinsic incorrectly. Once the CPU is seated, shut the bolt to secure it.

On tip of the CPU, setup the feverishness penetrate and fan, that will keep the processor cold and in working order. In demand to ensure that there is great meeting between the CPU and feverishness sink, you might must be increase thermal paste, but in our box the gum came pre-applied. Install the feverishness penetrate on tip of the processor and secure it with the enclosed latches. It should be snug. Plug the line is to air blower in to the labeled header on the motherboard.

Figure out that container on your motherboard you wish to setup the video card and punch out the analogous steel row on the back of the case. Insert and secure the card then use a screw to affix it to the back of the case. This will ensure the card doesn’t pierce when attaching your monitors.